OXAZOLIDINES
ALDIREZ BH
IS AN ALDIMINE LATENT CURING AGENT THAT HYDROLYSES ON EXPOSURE TO MOISTURE, YIELDING A REACTIVE AMINE CROSSLINKER.
Technical solutions for adhesives, friction, metalworking products, paints, inks, plastics, and rubbers
Raw Materials and Additives for Industrial Products
Showing 196 products
DEFOAMERS
ANTAROL L 837
MINERAL OIL DEFOAMER RECOMMENDED FOR EMULSION POLYMERIZATION PROCESS, ELIMINATES FILM DEFECTS CAUSED BY MICRO FOAM.
DEFOAMERS
ANTAROL L-855
MINERAL OIL HIGH PERFORMANCE DEFOAMER RECOMMENDED FOR EMULSION POLYMERIZATION PROCESS, ELIMINATES FILM DEFECTS CAUSED BY MICRO FOAM.
DEFOAMERS
ANTAROL TS-704
MINERAL OIL DEFOAMER RECOMMENDED FOR FLAT AND SEMI - GLOSS WATERBORNE ARCHITECTURAL PAINTS.
DEFOAMERS
ANTAROL TS-709
MINERAL OIL GENERAL PURPOSE DEFOAMER FOR ALL TYPES OF ARCHITECTURAL COATINGS, GOOD COMPATIBILITY DO NOT AFFECT THE APPEARANCE OF THE COATING.
DEFOAMERS
ANTAROL TS-760
MINERAL OIL DEFOAMER RECOMMENDED FOR HIGH GLOSS AND SEMI-GLOSS ARCHITECTURAL WATER BORNE COATINGS AND EMULSION POLYMERIZATION PROCESS.
ADDITIVES / CATALYSTS
ANTIGEL
VISCOSITY STABILIZER WITH WET AND DISPERSION PROPERTIES IN SOLVENT SYSTEMS.
DEGASSING AGENTS
BENZOINA (BENZOIN)
LOW COST DEGASSING AGENT, YELLOWS.
IRON OXIDE PIGMENTS
BLACK IRON OXIDE PIGMENT
BLACK IRON OXIDE PIGMENT FOR COATINGS
HOLLOW MICROSPHERES
CENOSPHERE LOW DENSITY 30 MESH
HOLLOW CERAMIC MICROSPHERES, THERMAL AND ACOUSTIC INSULATION IN ROOF COATINGS AND STUCCOS.
HOLLOW MICROSPHERES
CENOSPHERE SG
HOLLOW CERAMIC MICROSPHERES, THERMAL AND ACOUSTIC INSULATION, LOW DENSITY FILLER.
CERAMIC MICROSPHERES
CENOSPHERE SG
CERAMIC MICROSPHERE, IMPROVES THE FRICTION COEFFICIENT AT LOW AND HIGH TEMPERATURE.
REINFORCING AGENTS
CREAMIX TC 1004/5
GREY CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 250 MICRONS.
CELLULOSE FIBERS
CREAMIX TC 1004/5
RECYCLED CELLULOSE FIBER, MEDIAN FIBER LENGTH OF 250 MICRONS.
REINFORCING AGENTS
CREAMIX TC 1004/5
GREY CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 250 MICRONS.
CELLULOSE FIBERS
CREAMIX TC 1004/5
RECYCLED CELLULOSE FIBER, REINFORCING AGENT, MEDIAN FIBER LENGHT OF 250 MICRONS.
REINFORCING AGENTS
CREAMIX TC 2004
GREY CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 1000 MICRONS.
CELLULOSE FIBERS
CREAMIX TC 2004
RECYCLED CELLULOSE FIBER, MEDIAN FIBER LENGTH OF 1000 MICRONS.
REINFORCING AGENTS
CREAMIX TC 2004
GREY CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 1000 MICRONS.
CELLULOSE FIBERS
CREAMIX TC 2004
RECYCLED CELLULOSE FIBER, REINFORCING AGENT, MEDIAN FIBER LENGHT OF 1000 MICRONS.
REINFORCING AGENTS
CREATECH TC 40
WHITE CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 40 MICRONS.
REINFORCING AGENTS
CREATECH TC 40
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 40 MICRONS.
REINFORCING AGENTS
CREATECH TC 90
WHITE CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 90 MICRONS.
REINFORCING AGENTS
CREATECH TC 90
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 90 MICRONS.
REINFORCING AGENTS
CREATECH TC 200
WHITE CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 200 MICRONS.
REINFORCING AGENTS
CREATECH TC 200
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 200 MICRONS.
CELLULOSE FIBERS
CREATECH TC 200
PURE CELLULOSE FIBER, REINFORCING AGENT, MEDIAN FIBER LENGHT OF 300 MICRONS.
REINFORCING AGENTS
CREATECH TC 750
WHITE CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 800 MICRONS.
REINFORCING AGENTS
CREATECH TC 750
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 800 MICRONS.
CELLULOSE FIBERS
CREATECH TC 750
PURE CELLULOSE FIBER, REINFORCING AGENT, MEDIAN FIBER LENGHT OF 700 MICRONS.
REINFORCING AGENTS
CREATECH TC 2500
WHITE CELLULOSE FIBER, REINFORCING AGENT FOR ADHESIVES AND SEALANTS, FIBER LENGTH 2500 MICRONS.
REINFORCING AGENTS
CREATECH TC 2500
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 2500 MICRONS.
CELLULOSE FIBERS
CREATECH TC 2500
PURE CELLULOSE FIBER, REINFORCING AGENT, MEDIAN FIBER LENGHT OF 900 MICRONS.
DECORATIVE CHARGES
DECORFLAKE
NATURAL DECORATIVE MICA IN DIFFERENT COLORS AND PARTICLE SIZES
PHTHALO PIGMENTS
DEEPRA BLUE 501
PHTHALO BLUE PIGMENT 15:0 FOR WATER BASE INKS.
PIGMENTS AND DECORATIVE FILLERS
DEEPRA BLUE 501
PHTHALO BLUE PIGMENT 15:0.
PIGMENTS AND DECORATIVE FILLERS
DEEPRA BLUE 751
PHTHALO BLUE PIGMENT 15:1.
PHTHALO PIGMENTS
DEEPRA BLUE 801
PHTHALO BLUE PIGMENT 15:1 FOR WATER-BASED PAINTS AND INKS.
PHTHALO PIGMENTS
DEEPRA BLUE 1001
PHTHALO BLUE PIGMENT 15:3 FOR OFFSET INKS.
PHTHALO PIGMENTS
DEEPRA BLUE 1002
PHTHALO BLUE PIGMENT 15:3 FOR SOLVENT BASE PAINTS AND INKS.
PHTHALO PIGMENTS
DEEPRA BLUE 1003
PHTHALO BLUE PIGMENT 15:3 FOR WATER BASE PAINTS AND INKS.
PIGMENTS AND DECORATIVE FILLERS
DEEPRA BLUE 1004K
PHTHALO BLUE PIGMENT 15:3.
PHTHALO PIGMENTS
DEEPRA BLUE 1100 AMBTKN
PHTHALO BLUE PIGMENT 15:4 FOR NITROCELLULOSE AND POLYAMIDE SOLVENT BASE INKS, FLEXO AND GRAVURE.
PHTHALO PIGMENTS
DEEPRA BLUE 1100 HRGTN
PHTHALO BLUE PIGMENT 15:4 FOR SOLVENT BASE NITROCELLULOSE FLEXO INKS.
PHTHALO PIGMENTS
DEEPRA BLUE 1100 PNPS
PHTHALO BLUE PIGMENT 15:4 FOR ALL KIND OF SOLVENT BASE PAINTS AND INKS.
PHTHALO PIGMENTS
DEEPRA GREEN 2000
PHTHALO GREEN PIGMENT 7 FOR ALL KIND OF PAINTS AND INKS.
PIGMENTS AND DECORATIVE FILLERS
DEEPRA GREEN 2002
PHTHALO GREEN PIGMENT 7.
PIGMENTS AND DECORATIVE FILLERS
DEKORFLAKE
MICA FLAKES IN DIFFERENT COLORS AND BROAD PARTICLE SIZE, GOOD STABILITY AT 800 C.
ACRYLIC RESINS
ESCAT 22
CO-REACTANT FOR POLYESTER-ACRYLIC POWDER COATINGS, IMPROVES SMOTHNESS AND CHEMICAL PROPERTIES.
ADDITIVES / CATALYSTS
ESCAT 50
50% ACTIVE 2 - ISOPROPYL - IMIDAZOLE TO ACCELERATE THE CURE OF POWDER COATINGS, TYPICAL SYSTEMS SUCH POLYESTER - EPOXY, ACRYLIC - EPOXY AND POLYESTER - TGIC.
ADDITIVES / CATALYSTS
ESCAT 60
IS A PURIFIED IMIDAZOLE CATALYST ABSORBED ONTO A SILICA CARRIER. THE PRODUCT IS USED TO ACCELERATE THE CURE OF POWDER COATINGS THAT ARE RESPONSIVE TO IMIDAZOLE CATALYSIS.
ADDITIVES / CATALYSTS
ESCAT 124
IS TETRABUTYL AMMONIUM BROMIDE ABSORBED ONTO A POROUS CARRIER, RESULTING IN A HIGHLY REACTIVE CATALYST. POWDER COATINGS THAT CAN BE CATALYZED WITH ESCAT 124 INCLUDE POLYESTER-EPOXY, CARBOXYL ACRYLIC-EPOXY, POLYESTERS CURED BY GMA-FUNCTIONAL ACRYLICS AND POLYESTER-TGIC SYSTEMS. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
ESCAT A-130
IS A LIQUID CATALYST CONSISTING OF DIMETHYL AMINO METHYL PHENOL (DMP-30; 2,4,6-TRIS (DIMETHYLAMINOMETHYL) PHENOL; CAS# 90-72-2) ABSORBED ONTO A SILICA CARRIER. IT IS DESIGNED TO AID DISPERSION INTO EPOXY COATINGS AND IS AN EFFECTIVE CURING ACCELERATOR FOR EPOXY OR HYBRID SYSTEMS UTILIZING A POLYAMIDE OR ANHYDRIDE HARDENER. ESCAT A-130 IS COMPLIANT WITH FDA 175.300. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
ESCAT A-140
IS A LIQUID CATALYST CONSISTING OF DIMETHYL STEARYL AMINE (DMSA; N,N-DIMETHYL-1-OCTADECYLAMINE; CAS#124-28-7) ABSORBED ONTO A SILICA CARRIER. IT LOWERS THE CURE TEMPERATURE OF POLYESTER EPOXY HYBRID FORMULATIONS WHILE MAINTAINING HIGH FLOW AND GEL TIMES. IT CAN ALSO SERVE AS A DE-BLOCKING ACCELERATOR IN URETHANE DURABLE COATING SYSTEMS. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
ESCAT BT-71
TIN-BASED CATALYST COMPRISED OF DIBUTYLTIN DILAURATE ADSORBED ONTO A SILICA CARRIER FOR POLYURETHANE POWDER COATINGS.
INTUMESCENT FILLERS
FIRE CARB TEG 160
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANDS WHEN HEATED AT 1000 C UP TO 85 ml/g.
INTUMESCENT FILLERS
FIRE CARB TEG 160
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANSION 85 ml/g AT 1000º C.
INTUMESCENT FILLERS
FIRE CARB TEG 345
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANDS WHEN HEATED AT 1000 C UP TO 250 ml/g.
INTUMESCENT FILLERS
FIRE CARB TEG 345
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANSION 250 ml/g AT 1000º C.
DEFOAMERS
FOAM BLAST 20F
WAS DEVELOPED TO PROVIDE MAXIMUM FOAM CONTROL AQUEOUS, SOLVENT, AND UV AND EB-CURED INKS AND COATING SYSTEMS, ALLOWING THE INK AND COATING INDUSTRIES
DEFOAMERS
FOAM BLAST 269
IS A CONCENTRATED SILICONE EMULSION ANTIFOAM/DEFOAMER FOR USE IN HOT AND COLD AQUEOUS SYSTEMS. OVER A WIDE PH RANGE.
DEFOAMERS
FOAM BLAST 295
IS AN ORGANIC-SILICONE DEFOAMER DEVELOPED FOR USE AS A FOAM CONTROL AGENT FOR AQUEOUS SYSTEMS SUCH AS PRINTING FOUNTAIN SOLUTIONS, AQUEOUS RESINS, AND SURFACTANT SYSTEMS. IT DOES NOT CREATE HAZE, NOR DOES IT SEPARATE AND FORM A RING OR SURFACE LAYER.
DEFOAMERS
FOAM BLAST 331
HIGH PERFORMANCE MINERAL OIL DEFOAMER FOR COATINGS, INKS AND ADHESIVE SYSTEMS.
BIOCIDES AND DEFOAMERS
FOAM BLAST 552
ANTI-FOAMING FOR SOLUBLE, SEMI-SYNTHETIC AND SYNTHETIC METALWORKING FLUIDS.
FUMED AND PRECIPITATED SILICA
FUMED ALUMONIUM OXIDE
FLOW AGENT AND ELECTROSTATIC CHARGE IMPROVER FOR POWDER COATINGS
DECORATIVE CHARGES
GLITTERS
DECORATIVE PLASTIC FILLERS OF DIFFERENT COLORS AND BROAD PARTICLE SIZE. FOR INK AND COATINGS.
PIGMENTS AND DECORATIVE FILLERS
GLITTERS
DECORATIVE PLASTIC FILLERS OF DIFFERENT COLORS AND BROAD PARTICLE SIZE.
PRECIPITATED SILICAS
HUBERSIL 162
SILICON DIOXIDE IN POWDER FORM, ANTIBLOCKING AGENT AND ANTIPLATE OUT.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
HYDRAL 710
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
HYDRAL 710
PRECIPITATED ALUMINUM TRIHYDROXIDE, MEDIAN PARTICLE SIZE OF 1.0 MICRONS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
HYDRAL COAT 2
ULTRA FINE ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
HYDRAL PGA SD
PRECIPITATED AND DENSIFIED ALUMINUM TRIHYDROXIDE, MEDIAN PARTICLE SIZE OF 1.0 MICRONS.
FUMED AND PRECIPITATED SILICA
HYDROPHILIC FUMED SILICA
THICKENER, THIXOTROPIC AND ANTI-SETTLING AGENT FOR PAINTS, INKS, ADHESIVES AND SEALANTS
FUMED AND PRECIPITATED SILICA
HYDROPHOBIC FUMED SILICA
THICKENER, THIXOTROPIC , ANTI SETTLING AND SAG RESISTANCE AGENT FOR COATINGS, SEALANTS AND ADHESIVES
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
HYMOD MICRAL SERIES
SURFACED TREATED ALUMINUM TRIHYDROXIDE.
OXAZOLIDINES
INCOZOL 2
OXAZOLIDINE BASED, MOISTURE SCAVENGER IN 1K AND 2K POLYURETHANE COATINGS.
OXAZOLIDINES
INCOZOL 2
MOISTURE SCAVENGER FOR POLYURETHANE COATINGS. OXAZOLIDINE BASE.
OXAZOLIDINES
INCOZOL 4
BIS-OXAZOLIDINE CURING AGENT FOR POLYURETHANES SEALANTS AND ELASTOMERS.
OXAZOLIDINES
INCOZOL EH
HIGH PURITY CURING AGENT FOR POLYURETHANES.
ACRYLIC RESINS
ISOCRYL C-78
SOLID ACRYLIC RESIN WITH TG = 67-75°C SUITABLE FOR USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS, INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ACRYLIC RESINS
ISOCRYL C-80
OLID ACRYLIC RESIN USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS WITH ENHANCED WEATHERABILITY PERFORMANCE. TG = 75 - 85°C, ALSO RECOMMENDED FOR INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ACRYLIC RESINS
ISOCRYL EP-450
SOLID ACRYLIC RESIN DESIGNED FOR CLEAR POWDER COATINGS APPLICATIONS, COMPATIBLE WITH OTHER POWDER COATINGS BINDER SYSTEMS TG = 68°C.
ACRYLIC RESINS
ISOCRYL EP-460
SOLID ACRYLIC RESIN FOR CLEAR POWDER COATINGS, CAN BE CURED WITH CARBOXYL OR AMINE FUNCTIONAL CURATIVES. TG = 44 - 55°C.
MATTING AGENTS
ISOCRYL EP-570G
ACRYLIC MATTING RESIN FOR POLYESTER POWDER COATINGS, STANDARD AND SUPERDURABLE. GIVES THE BEST APPEARANCE.
MATTING AGENTS
ISOCRYL EP-575G
ACRYLIC MATTING RESIN FOR STANDARD AND SUPERDURABLE POLYESTER POWDER COATINGS, EXCELLENT IMPACT AND CHEMICAL RESISTANCE PROPERTIES.
MATTING AGENTS
ISOCRYL EP-578G
IS A GLYCIDYL-FUNCTIONAL, ACRYLIC COPOLYMER DESIGNED FOR USE AS A HARDENER CAPABLE OF PRODUCING MATTE EXTERIOR-DURABLE POLYESTER POWDER COATINGS. FORMULATED PROPERLY, IT WILL ACHIEVE <10 GLOSS (600) IN PIGMENTED COATINGS WITH A VARIETY OF STANDARD AND SUPER-DURABLE RESINS IN A SINGLE EXTRUSION SYSTEM WHILE ALSO EXHIBITING EXCELLENT BURNISH RESISTANCE, CHEMICAL RESISTANCE, AND MECHANICAL PROPERTIES. ADDITIONAL BENEFITS INCLUDE SMOOTH APPEARANCE OF THE CURED FILM AND LOW CONTAMINATION CHARACTERISTICS.
MATTING AGENTS
ISOCRYL EP-581LT
ACRYLIC MATTING RESIN FOR LOW TEMPERATURE CURED POLYESTER POWDER COATINGS. ABLE TO ACHIEVE 60° GLOSS < 10 IN PIGMENTED SYSTEMS.
MATTING AGENTS
ISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).\n\n
ACRYLIC RESINS
ISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).
MATTING AGENTS
ISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ACRYLIC RESINS
ISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ACRYLIC RESINS
ISOCRYL GMA-300G
GLYCIDYL - FUNCTIONAL ACRYLIC POLYMER FOR POLYESTER - ACRILIC HYBRID POWDER COATINGS.
MATTING AGENTS
ISOCRYL H-1871
ACRYLIC MATTING RESIN FOR POLYESTER - PU POWDER COATINGS. EXCELLENT BURNISH RESISTANCE IN DARK COLORS.
CLAYS
KAMIN 70C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL AND TRAFFIC PAINTS.
TITANIUM DIOXIDE EXTENDERS
KAMIN 70C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL AND TRAFFIC PAINTS.
CLAYS
KAMIN 90
DELAMINATED CLAY, ALUMINUM SILICATE. TITANIUM BIOXIDE EXTENDER FOR HIGH GLOSS ARCHITECTURAL PAINTS.
TITANIUM DIOXIDE EXTENDERS
KAMIN 90
DELAMINATED CLAY, ALUMINUM SILICATE. TITANIUM BIOXIDE EXTENDER FOR HIGH GLOSS ARCHITECTURAL PAINTS.
CLAYS
KAMIN 2000C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL PAINTS.
TITANIUM DIOXIDE EXTENDERS
KAMIN 2000C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL PAINTS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
KEMGARD 501
CALCIUM MOLYBDATE COMPLEX, FOR FLAME RETARDANCY AND SMOKE SUPPRESSION IN PLASTICS COMPOUNDS, MEDIAN PARTICLE SIZE OF 3.7 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
KEMGARD 700Z
ZINC MOLYBDATE AND ZINC BORATE COMPLEX, SMOKE SUPPRESSANT AND CHAR FORMER, MEDIAN PARTICLE SIZE OF 2.5 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
KEMGARD 911A
CALCIUM MOLYBDATE ZINC COMPLEX, SMOKE SUPPRESSANT AND CHAR FORMER, MEDIAN PARTICLE SIZE OF 2.7 MICRONS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
KEMGARD 981
BASIC COMPLEX ZINC PHOSPHATE, USED AS FLAME RETARDANTS AND SMOKE SUPPRESSANTS IN COATINGS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
KEMGARD 981
ZINC PHOSPHATE COMPLEX, SMOKE SUPPRESSANT AND CHAR FORMER, MEDIAN PARTICLE SIZE OF 4.4 MICRONS.
ADDITIVES / CATALYSTS
KORRODUR
ANTICORROSIVE AGENT FOR SOLVENT BASED COATINGS.
ADDITIVES / CATALYSTS
LA THIX FB
LIQUID RHEOLOGICAL MODIFIER. FOR SOLVENT BASED COATINGS.
CLAYS
LITHOSPERSE 7005 CS
HIGH PERFORMANCE TREATED CLAY, EXCELLENT CHOICE FOR COLD SET LITHOGRAPHIC INKS, REDUCES MIST IN HIGH SPEED SYSTEMS.
UV CURING RESINS
LUMICRYL 102
UV / EB CURABLE ACRYLIC MONOMER SUITABLE FOR FORMULATING COATINGS AND INKS WITH EXCELLENT ABRASION AND CHEMICAL RESISTANCE.
UV CURING RESINS
LUMICRYL 2382
SOLVENT - BORNE ACRYLATED ACRYLIC MACROMER SUITABLE FOR FORMULATING UV CURABLE COATINGS AND INKS, WILL DRY TO A TACK - FREE AND NON - BLOCKING FILM AFTER THE SOLVENT IS REMOVED.
UV CURING RESINS
LUMICRYL U-721S
UV / EB CURABLE ACRYLIC MACROMER SUITABLE FOR FORMULATING COATINGS AND INKS WITH EXCELLENT ABRASION AND CHEMICAL RESISTANCE, AND OUTSTANDING MECHANICAL PROPERTIES.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
MAGNIFIN
HIGH PURITY MAGNESIUM HYDROXIDE NEAT AND SURFACE TREATED GRADES WITH A BROAD RANGE OF PARTICLE SIZE.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
MARTINAL
PRECIPITATED ALUMINUM TRIHYDROXIDE, NEAT AND SURFACE TREATED GRADES WITH A BROAD RANGE OF PARTICLE SIZE.
PIGMENTS AND DECORATIVE FILLERS
MICACLAD
COLORED MICAS, FDA COMPLIANCE.
DECORATIVE CHARGES
MICACLAD
NATURAL DECORATIVE MICA IN DIFFERENT COLORS AND PARTICLE SIZES.
MICAS
MICAFORT PW30
PHLOGOPITE MICA, HIGH ASPECT RATIO, MEDIAN PARTICLE SIZE OF 18 MICRONS.
MICAS
MICAFORT PW80
PHLOGOPITE MICA, HIGH ASPECT RATIO, MEDIAN PARTICLE SIZE OF 35 MICRONS.
BARRIER PIGMENTS
MICAFORT SX 300
MUSCOVITE MICA, POTASSIUM ALUMINUM SILICATE FOR INDUSTRIAL COATINGS WITH HIGH ASPECT RATIO AND HIGH BRIGHTNESS.
MICAS
MICAFORT SX 300
MUSCOVITE MICA, WHITE, WET MILLED.
BARRIER PIGMENTS
MICA MT 200
MUSCOVITE MICA, POTASSIUM ALUMINUM SILICATE FOR INDUSTRIAL COATINGS, 200 MESH FOR INDUSTRIAL COATINGS AND JOINT COMPOUNDS.
MICAS
MICA MT 200C
MUSCOVITE MICA, DRY MILLED.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
MICRAL 632
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS, MEDIAN PARTICLE DIAMETER MICRONS 3.5
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
MICRAL 1500
GROUND ALUMINUM TRIHYDROXIDE, MEDIAN PARTICLE SIZE OF 1.5 MICRONS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
MICRAL 1500
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS, MEDIAN PARTICLE DIAMETER MICRONS 1.5
TALCS
MICRON TALC 2050
HIGH PURITY TALC WITH A MEDIAN PARTICLE SIZE OF 5 MICRONS.
TALCS
MICRON TALC 2050
LAMELLAR FILLER, MEDIAN PARTICLE SIZE OF 5 MICRONS.
TALCS
MICRON TALC 2050 SSW
HYDRATED MAGNESIUM SILICATE, HIGH PURITY TALC, FREE FROM CRYSTALLINE SILICA AND FREE OF ASBESTOS. FOR PAINTS AND COATINGS, 4-5 HEGMAN.
TALCS
MICRON TALC 5030 SSW
MAGNESIUM SILICATE, HIGH PURITY TALC, FREE FROM CRYSTALLINE SILICA AND FREE OF ASBESTOS. FOR PAINTS AND COATINGS, 4-5 HEGMAN.
MICACEOUS IRON OXIDE
MIOX AS
MICACEOUS IRON OXIDE, HIGHER FRICTION COEFFICIENT AND NOISE REDUCTION.
BARRIER PIGMENTS
MIOX MICRO 40
MICACEOUS IRON OXIDE FOR INDUSTRIAL COATINGS, MEDIAN PARTICLE SIZE 40 MICRONS.
BARRIER PIGMENTS
MIOX SG
MICACEOUS IRON OXIDE FOR HIGH PERFORMANCE ANTICORROSIVE INDUSTRIAL COATINGS.
TACKIFIER AGENTS
NOVARES C 100
INDENE-COUMARONE-RESIN. TACKIFIER AGENTS FOR SOLVENT POLYCHLOROPRENE BASED ADHESIVES.
RESINS
NOVARES C 100
INDENE CUMARONE RESIN, BALL AND RING OF 105 °C.
HYDROCARBON RESINS
NOVARES TD 100
HYDROCARBON RESIN. PROMOTES THE LEAFING EFFECT IN ALUMINUM PAINTS. IMPROVES MOISTURE RESISTANCE, REDUCES DRYING TIME.
RESINS
NOVARES TD 100
C9 HYDROCARBON RESIN, BALL AND RING OF 105 °C, GENERAL PURPOSE.
TACKIFIER AGENTS
NOVARES TK 100
HYDROCARBON RESIN. TACKIFIER AGENT IN HOT MELT PSA ADHESIVES. EXCELLENT COMPATIBILITY WITH EVA BASED ADHESIVES.
HYDROCARBON RESINS
NOVARES TK 100
HYDROCARBON RESIN. PROMOTES THE LEAFING EFFECT IN ALUMINUM PAINTS. IMPROVES MOISTURE RESISTANCE AND GLOSS. REDUCES DRYING TIME. EXCELLENT CHOICE FOR WOOD VARNISHES.
RESINS
NOVARES TK 100
C9 HYDROCARBON RESIN, BALL AND RING OF 105 °C.
TACKIFIER AGENTS
NOVARES TN 140
HYDROCARBON RESIN. TACKIFIER AGENT FOR SOLVENT BASED POLYCHLOROPRENE ADHESIVES.
TACKIFIER AGENTS
NOVARES TN 160
HYDROCARBON RESIN. TACKIFIER AGENT IN SIS PSA ADHESIVES AND POLYCHLOROPRENE SOLVENT BASED ADHESIVES.
CLAYS
NUCAP 290W
SURFACE TREATED CLAY, REINFORCING FILLER AND EXTENDER FOR ELASTOMERIC SYSTEMS.
CLAYS
NYLOK 171
SURFACE TREATED CALCINED CLAY, REINFORCING AGENT FOR POLYAMIDES AND RUBBERS.
NATURAL RED IRON OXIDE
OXIRED MR 11
RED IRON OXIDE PIGMENT, MEDIAN PARTICLE SIZE OF 0.9 MICRONS.
NATURAL RED IRON OXIDE
OXIRED MR 11
NATURAL RED IRON OXIDE WITH HIGH OPACITY.
PIGMENTS AND DECORATIVE FILLERS
OXIRED MR 11
NATURAL RED IRON OXIDE, MEDIAN PARTICLE SIZE 0.9 MICRONS.
DEGASSING AGENTS
OXYMELT A-2
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE FOR USE IN SYSTEMS CURED BY GAS OVENS.
DEGASSING AGENTS
OXYMELT A-4
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE, COMPLIES WITH FDA 175.300
THIXOTROPIC AGENT
PALYGEL 325NA
ATAPULGITE, ALUMINUM MAGNESIUM SILICATE, THIXOTROPIC AND ANTI-SETTING AGENT FOR INDUSTRIAL COATINGS.
DECORATIVE CHARGES
PEARLESCENT PIGMENTS
COLORED MICAS OF DIFFERENT PARTICLE SIZE AND COLORS.
PIGMENTS AND DECORATIVE FILLERS
PEARLESCENT PIGMENTS
COLORED MICAS OF DIFFERENT PARTICLE SIZE AND COLORS.
MATTING AGENTS
PERGOPAK
ORGANIC MATTING AGENT THAT ALSO PROVIDES \"SOFT FEEL\" FINISHES TO PAINTS AND VARNISHES.
CLAYS
POLYGLOSS 90
ULTRA FINE DELAMINATED CLAY, ALUMINUM SILICATE FOR HIGH GLOSS WATER AND SOLVENT BASE PAINTS.
TITANIUM DIOXIDE EXTENDERS
POLYGLOSS 90
ULTRA FINE DELAMINATED CLAY, ALUMINUM SILICATE FOR HIGH GLOSS WATER AND SOLVENT BASE PAINTS.
CLAYS
POLYGLOSS 90
ULTRAFINE CLAY, TITANIUM DIOXIDE EXTENDER.
CLAYS
POLYPLATE P 01
ALUMINUM SILICATE DELAMINATED AND WASHED CLAY FOR SOLVENT AND WATER BASE INDUSTRIAL COATINGS.
ADHESION PROMOTERS
POLYTEX E 75
SULFONAMIDE EPOXY BASED RESIN, DILUTED IN BUTYL ACETATE, ADHESION AND GLOSS PROMOTER, FORMALDEHYDE FREE.
ADHESION PROMOTERS
POLYTEX E 75
SULFONAMIDE EPOXY RESIN DILUTED IN BUTYL ACETATE, FORMALDEHYDE FREE, GLOSS AND ADHESION PROMOTER FOR NAIL ENAMELS AND PRINTING INKS.
ADHESION PROMOTERS
POLYTEX E 100
SULFONAMIDE EPOXY BASED RESIN, 100% SOLIDS, FORMALDEHYDE FREE.
ADHESION PROMOTERS
POLYTEX E 100
SULFONAMIDE EPOXY RESIN 100% SOLIDS, FREE OF FORMALDEHYDE. ADHESION AND GLOSS PROMOTER IN NAIL ENAMELS.
FUMED AND PRECIPITATED SILICA
PRECIPITATED SILICON DIOXIDE
REINFORCING AND THIXOTROPIC AGENT FOR ADHESIVES AND SEALANTS
FUMED AND PRECIPITATED SILICA
PRECIPITATED SILICON DIOXIDE
MATTING AGENT FOR INKS AND COATINGS
IRON OXIDE PIGMENTS
RED IRON OXIDE PIGMENT
RED IRON OXIDE PIGMENT FOR PAINTS AND ROOF COATINGS
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW 3N
LEVELING AND FLOW CONTROL AGENT FOR USE IN WATERBASED COATINGS. ACRYLIC POLYMER BASE, CAN ALSO BE INCORPORATED INTO HIGH SOLIDS AND SOLVENT BASED COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW L65F
ACRYLIC FLOW CONTROL AGENT IS USED MAINLY IN SOLVENT BORNE AUTOMOTIVE CLEARCOATS AND INDUSTRIAL COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW LF
ACRYLIC LEVELING AGENT USED IN HIGH SOLIDS, UV CURING, COIL, AND OTHER COATING SYSTEMS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW LG 99
NON-SILICONE FLOW, LEVELING AND WETTING ADDITIVE FOR UV AND SOLVENT-BASED INKS AND COATINGS. CAN ALSO BE USED IN UV FREE RADICAL, CATIONIC CURE SYSTEMS AND SOLVENT-BASED COATINGS.
UV CURING RESINS
RESIFLOW LG 99
IS A NON-SILICONE, FLOW, LEVELING AND WETTING ADDITIVE FOR UV AND SOLVENT-BASED INKS AND COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW LV 67
ACRYLIC FLOW AND LEVELING ADDITIVE USED IN GENERAL INDUSTRIAL AND COIL COATING SYSTEMS TO IMPROVE AIR RELEASE AND REDUCE SOLVENT POPPING.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW P-37
CRATER REPAIR FLOW CONTROL AGENT FOR POWDER COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW P-64F
FLOW CONTROL AGENT FOR CLEAR POWDER COATINGS, GIVES THE BEST CLARITY.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW P-67
FLOW CONTROL AGENT FOR POWDER COATINGS, WIDE END USES, INDUSTRY STANDARS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW P-71
IS BASED ON A LOW VISCOSITY, LIQUID ACRYLIC POLYMER THAT HAS BEEN CONVERTED INTO A FREE-FLOWING POWDER BY ADSORPTION ONTO SILICA-TYPE FILLER. THE PRODUCT HAS SUPERIOR FLOW AND LEVELING CHARACTERISTICS WITH EXCELLENT CLARITY ESSENTIAL FOR CLEAR POWDER COATINGS. SURFACE DEFECTS SUCH AS ORANGE PEEL, CRATERS, PINHOLES, AND OTHER IMPERFECTIONS CAN BE REDUCED OR ELIMINATED BY INCORPORATING 0.7-1.5% OF RESIFLOW P-71 INTO POWDER COATING FORMULATIONS. IT IS ESPECIALLY RECOMMENDED FOR USE IN GMA AND TGIC CLEARS.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW PL-200
FLOW CONTROL AND LEVELLING AGENT WITH EXCELENT RECOATABILITY PROPERTIES.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW PL-330
NEXT GENERATION FLOW CONTROL AGENT WITH THE BEST RESISTANCE TO CONTAMINATION.
LEVELLING AGENTS AND FLOW PROMOTERS
RESIFLOW PL-440
IS A HIGH-PERFORMANCE FLOW CONTROL AGENT DESIGNED TO HIDE THE EFFECTS OF CROSS-CONTAMINATION WHILE PROVIDING SUPERIOR FLOW AND LEVELING CHARACTERISTICS. IMPROVED COMPATIBILITY CAN LOWER MANUFACTURING COSTS BY REDUCING BOTH REWORK AND CLEAN-UP DURING PRODUCT CHANGEOVERS. RESIFLOW PL-440 ALSO DEMONSTRATES EXCELLENT RECOAT AND ADHESION PROPERTIES. THIS PRODUCT IS SUITABLE ACROSS A WIDE SPECTRUM OF BINDER CHEMISTRIES INCLUDING POLYESTERS, POLYURETHANES, HYBRIDS, EPOXIES, AND ACRYLICS.
THIXOTROPIC AGENT
RIOBENT
BENTONITE, THIXOTROPIC AND ANTI-SETTING AGENT FOR INDUSTRIAL COATINGS SOLVENT BASE
WAXES
SBS 1200
SYNTHETIC WAX USED IN POWDER COATINGS TO IMPART SLIP, IMPROVE MAR RESISTANCE AND LOWER GLOSS.
WAXES
SBS 1215
SPECIAL POLYOLEFIN PTFE WAX USED IN POWDER COATINGS TO PROVIDE EXCEPTIONAL SCRATCH, ABRASION, MAR AND WATER RESISTANCE.
ADDITIVES / CATALYSTS
SCHWEGO FLUOR
SUBSTRATE WETTING AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
ADDITIVES / CATALYSTS
SCHWEGO WETT
WETTING AND DISPERSANT AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
TITANIUM DIOXIDE EXTENDERS
SPACE RITE S3
ALUMINUM TRIHYDRATE, FLAME RETARDANT, SMOKE SUPPRESSANT AND TITANIUM DIOXIDE EXTENDER FOR PAINT AND COATINGS.
ADHESION PROMOTERS
SULFONEX M 80
TOSYLAMIDE/FORMALDEHYDE RESIN USED AS A MODIFIER IN LACQUERS, INKS AND ADHESIVES. PROMOTE GLOSS, ADHESION AND OVERALL DURABILITY.
FUMED AND PRECIPITATED SILICA
SURFACE TREATED FUMED SILICA
HIGH PERFORMANCE MATTING AGENT FOR INKS AND COATINGS
FUMED AND PRECIPITATED SILICA
SURFACE TREATED SILICON DIOXIDE
HIGH EFFICIENCY MATTING AGENT FOR COATINGS AND INKS
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
ULTRACARB
HUNTITE AND HYDROMAGNESITE, SMOKE SUPPRESSANT AND FLAME RETARDANT, MEDIAN PARTICLE SIZE OF 4.0 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
VERTEX 60
MAGNESIUM HYDROXIDE, MEDIAN PARTICLE SIZE OF 2.8 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
VERTEX 100
MAGNESIUM HYDROXIDE, MEDIAN PARTICLE SIZE OF 1.5 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
VERTEX SP, HST, SA, PK
SURFACE TREATED MAGNESIUM HYDROXIDE.
ADDITIVES / CATALYSTS
WORLÉE ADD 315
SILICON BASED ADDITIVE, FOR WATER AND SOLVENT BASED PAINTS, IMPROVING MAR RESISTANCE AND SLIP, FLOW AND GLOSS.
ALKYD EMULSIONS FOR WATERBORNE PAINTS AND VARNISHES
WORLÉESOL E 150W
ALKYD EMULSION RESIN WITH LOW POLYURETHANE MODIFICATION, WIDE RANGE OF APPLICATIONS.
ALKYD EMULSIONS FOR WATERBORNE PAINTS AND VARNISHES
WORLÉESOL E 330 W
ALKYD POLYURETHANE EMULSION. RESIN FOR ANTICORROSIVE PRIMERS AND TOP COATS.
IRON OXIDE PIGMENTS
YELLOW IRON OXIDE PIGMENT
YELLOW IRON OXIDE PIGMENT FOR COATINGS
PRECIPITATED SILICAS
ZEOPOL 8745
HIGHLY DISPERSIBLE AND HIGH SURFACE AREA SILICON DIOXIDE IN GRANULAR FORM.
PRECIPITATED SILICAS
ZEOPOL 8755LS
HIGHLY DISPERSIBLE SILICON DIOXIDE IN GRANULAR FORM.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
ZEROGEN 50
MAGNESIUM HYDROXIDE, HIGH PURITY, MEDIAN PARTICLE SIZE OF 1.0 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
ZEROGEN 100
MAGNESIUM HYDROXIDE, HIGH PURITY, MEDIAN PARTICLE SIZE OF 0.7 MICRONS.
FLAME RETARDANTS AND SMOKE SUPPRESSANTS
ZEROGEN SA, SP, HST, PK
HIGH PURITY SURFACE TREATED MAGNESIUM HYDROXIDE.
No products found
Try another name, category, application, or industrial sector.
Industrial application sectors
Explore our solutions by industry, formulation, and process type.
Industrial sector
View full catalogAdhesives and Sealants
Reinforcing agents, tackifiers, intumescent fillers, hollow microspheres, oxazolidines, and adhesion promoters for industrial formulations.
Adhesion promoters
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Hollow microspheres
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Intumescent fillers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Oxazolidines
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Reinforcing agents
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Tackifier agents
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Industrial sector
View full catalogFriction
Fibers, fillers, and specialized raw materials for the manufacture of friction materials and components.
Cellulose fibers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Ceramic microspheres
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Micaceous iron oxide
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Natural red iron oxide
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Talcs
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Industrial sector
View full catalogMetalworking Products
Biocides, defoamers, and solutions for cutting fluids and metalworking processes.
Biocides and defoamers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Industrial sector
View full catalogPaints and Inks
Additives, pigments, fillers, resins, and solutions for paints, coatings, and printing inks.
Acrylic resins
8 products available
View full lineESCAT 22
CO-REACTANT FOR POLYESTER-ACRYLIC POWDER COATINGS, IMPROVES SMOTHNESS AND CHEMICAL PROPERTIES.
ISOCRYL C-78
SOLID ACRYLIC RESIN WITH TG = 67-75°C SUITABLE FOR USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS, INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ISOCRYL C-80
OLID ACRYLIC RESIN USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS WITH ENHANCED WEATHERABILITY PERFORMANCE. TG = 75 - 85°C, ALSO RECOMMENDED FOR INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ISOCRYL EP-450
SOLID ACRYLIC RESIN DESIGNED FOR CLEAR POWDER COATINGS APPLICATIONS, COMPATIBLE WITH OTHER POWDER COATINGS BINDER SYSTEMS TG = 68°C.
ISOCRYL EP-460
SOLID ACRYLIC RESIN FOR CLEAR POWDER COATINGS, CAN BE CURED WITH CARBOXYL OR AMINE FUNCTIONAL CURATIVES. TG = 44 - 55°C.
ISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).
ISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ISOCRYL GMA-300G
GLYCIDYL - FUNCTIONAL ACRYLIC POLYMER FOR POLYESTER - ACRILIC HYBRID POWDER COATINGS.
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Additives / Catalysts
12 products available
View full lineANTIGEL
VISCOSITY STABILIZER WITH WET AND DISPERSION PROPERTIES IN SOLVENT SYSTEMS.
ESCAT 50
50% ACTIVE 2 - ISOPROPYL - IMIDAZOLE TO ACCELERATE THE CURE OF POWDER COATINGS, TYPICAL SYSTEMS SUCH POLYESTER - EPOXY, ACRYLIC - EPOXY AND POLYESTER - TGIC.
ESCAT 60
IS A PURIFIED IMIDAZOLE CATALYST ABSORBED ONTO A SILICA CARRIER. THE PRODUCT IS USED TO ACCELERATE THE CURE OF POWDER COATINGS THAT ARE RESPONSIVE TO IMIDAZOLE CATALYSIS.
ESCAT 124
IS TETRABUTYL AMMONIUM BROMIDE ABSORBED ONTO A POROUS CARRIER, RESULTING IN A HIGHLY REACTIVE CATALYST. POWDER COATINGS THAT CAN BE CATALYZED WITH ESCAT 124 INCLUDE POLYESTER-EPOXY, CARBOXYL ACRYLIC-EPOXY, POLYESTERS CURED BY GMA-FUNCTIONAL ACRYLICS AND POLYESTER-TGIC SYSTEMS. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ESCAT A-130
IS A LIQUID CATALYST CONSISTING OF DIMETHYL AMINO METHYL PHENOL (DMP-30; 2,4,6-TRIS (DIMETHYLAMINOMETHYL) PHENOL; CAS# 90-72-2) ABSORBED ONTO A SILICA CARRIER. IT IS DESIGNED TO AID DISPERSION INTO EPOXY COATINGS AND IS AN EFFECTIVE CURING ACCELERATOR FOR EPOXY OR HYBRID SYSTEMS UTILIZING A POLYAMIDE OR ANHYDRIDE HARDENER. ESCAT A-130 IS COMPLIANT WITH FDA 175.300. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ESCAT A-140
IS A LIQUID CATALYST CONSISTING OF DIMETHYL STEARYL AMINE (DMSA; N,N-DIMETHYL-1-OCTADECYLAMINE; CAS#124-28-7) ABSORBED ONTO A SILICA CARRIER. IT LOWERS THE CURE TEMPERATURE OF POLYESTER EPOXY HYBRID FORMULATIONS WHILE MAINTAINING HIGH FLOW AND GEL TIMES. IT CAN ALSO SERVE AS A DE-BLOCKING ACCELERATOR IN URETHANE DURABLE COATING SYSTEMS. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ESCAT BT-71
TIN-BASED CATALYST COMPRISED OF DIBUTYLTIN DILAURATE ADSORBED ONTO A SILICA CARRIER FOR POLYURETHANE POWDER COATINGS.
KORRODUR
ANTICORROSIVE AGENT FOR SOLVENT BASED COATINGS.
LA THIX FB
LIQUID RHEOLOGICAL MODIFIER. FOR SOLVENT BASED COATINGS.
SCHWEGO FLUOR
SUBSTRATE WETTING AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
SCHWEGO WETT
WETTING AND DISPERSANT AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
WORLÉE ADD 315
SILICON BASED ADDITIVE, FOR WATER AND SOLVENT BASED PAINTS, IMPROVING MAR RESISTANCE AND SLIP, FLOW AND GLOSS.
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Adhesion promoters
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Alkyd emulsions for waterborne paints and varnishes
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Barrier pigments
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Clays
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Decorative Charges
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Defoamers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Degassing agents
3 products available
View full lineBENZOINA (BENZOIN)
LOW COST DEGASSING AGENT, YELLOWS.
OXYMELT A-2
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE FOR USE IN SYSTEMS CURED BY GAS OVENS.
OXYMELT A-4
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE, COMPLIES WITH FDA 175.300
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Flame Retardant Agents and Smoke Suppressants
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Fumed and precipitated silica
7 products available
View full lineFUMED ALUMONIUM OXIDE
FLOW AGENT AND ELECTROSTATIC CHARGE IMPROVER FOR POWDER COATINGS
HYDROPHILIC FUMED SILICA
THICKENER, THIXOTROPIC AND ANTI-SETTLING AGENT FOR PAINTS, INKS, ADHESIVES AND SEALANTS
HYDROPHOBIC FUMED SILICA
THICKENER, THIXOTROPIC , ANTI SETTLING AND SAG RESISTANCE AGENT FOR COATINGS, SEALANTS AND ADHESIVES
PRECIPITATED SILICON DIOXIDE
REINFORCING AND THIXOTROPIC AGENT FOR ADHESIVES AND SEALANTS
PRECIPITATED SILICON DIOXIDE
MATTING AGENT FOR INKS AND COATINGS
SURFACE TREATED FUMED SILICA
HIGH PERFORMANCE MATTING AGENT FOR INKS AND COATINGS
SURFACE TREATED SILICON DIOXIDE
HIGH EFFICIENCY MATTING AGENT FOR COATINGS AND INKS
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Hollow microspheres
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Hydrocarbon resins
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Intumescent fillers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Iron oxide pigments
3 products available
View full lineBLACK IRON OXIDE PIGMENT
BLACK IRON OXIDE PIGMENT FOR COATINGS
RED IRON OXIDE PIGMENT
RED IRON OXIDE PIGMENT FOR PAINTS AND ROOF COATINGS
YELLOW IRON OXIDE PIGMENT
YELLOW IRON OXIDE PIGMENT FOR COATINGS
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Levelling Agents and Flow Promoters
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Matting agents
8 products available
View full lineISOCRYL EP-570G
ACRYLIC MATTING RESIN FOR POLYESTER POWDER COATINGS, STANDARD AND SUPERDURABLE. GIVES THE BEST APPEARANCE.
ISOCRYL EP-575G
ACRYLIC MATTING RESIN FOR STANDARD AND SUPERDURABLE POLYESTER POWDER COATINGS, EXCELLENT IMPACT AND CHEMICAL RESISTANCE PROPERTIES.
ISOCRYL EP-578G
IS A GLYCIDYL-FUNCTIONAL, ACRYLIC COPOLYMER DESIGNED FOR USE AS A HARDENER CAPABLE OF PRODUCING MATTE EXTERIOR-DURABLE POLYESTER POWDER COATINGS. FORMULATED PROPERLY, IT WILL ACHIEVE <10 GLOSS (600) IN PIGMENTED COATINGS WITH A VARIETY OF STANDARD AND SUPER-DURABLE RESINS IN A SINGLE EXTRUSION SYSTEM WHILE ALSO EXHIBITING EXCELLENT BURNISH RESISTANCE, CHEMICAL RESISTANCE, AND MECHANICAL PROPERTIES. ADDITIONAL BENEFITS INCLUDE SMOOTH APPEARANCE OF THE CURED FILM AND LOW CONTAMINATION CHARACTERISTICS.
ISOCRYL EP-581LT
ACRYLIC MATTING RESIN FOR LOW TEMPERATURE CURED POLYESTER POWDER COATINGS. ABLE TO ACHIEVE 60° GLOSS < 10 IN PIGMENTED SYSTEMS.
ISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).\n\n
ISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ISOCRYL H-1871
ACRYLIC MATTING RESIN FOR POLYESTER - PU POWDER COATINGS. EXCELLENT BURNISH RESISTANCE IN DARK COLORS.
PERGOPAK
ORGANIC MATTING AGENT THAT ALSO PROVIDES \"SOFT FEEL\" FINISHES TO PAINTS AND VARNISHES.
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Natural red iron oxide
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Oxazolidines
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
PHTHALO Pigments
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Reinforcing agents
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Talcs
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Thixotropic Agent
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Titanium dioxide extenders
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
UV Curing Resins
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Waxes
2 products available
View full lineSBS 1200
SYNTHETIC WAX USED IN POWDER COATINGS TO IMPART SLIP, IMPROVE MAR RESISTANCE AND LOWER GLOSS.
SBS 1215
SPECIAL POLYOLEFIN PTFE WAX USED IN POWDER COATINGS TO PROVIDE EXCEPTIONAL SCRATCH, ABRASION, MAR AND WATER RESISTANCE.
Need information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Industrial sector
View full catalogPlastics and Rubbers
Clays, fibers, micas, pigments, resins, flame retardants, silicas, and talcs for polymer systems.
Cellulose fibers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Clays
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Flame Retardants and Smoke Suppressants
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Micas
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Pigments and Decorative Fillers
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Precipitated silicas
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Resins
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Talcs
0 products available
View full lineNeed information?
Request technical assistanceOur team can help you select the right solution for your formulation or process.
Industrial sectors
Access raw materials and available product lines directly for each sector.
ISO 9001:2015 Certification
Committed to quality, continuous improvement, and excellence in our processes.
38 years of experience
A proven track record providing reliable solutions to a wide range of industrial sectors.
Nationwide coverage
Service and distribution capabilities throughout Mexico.