OXAZOLIDINES
REQUEST INFORMATIONALDIREZ BH
IS AN ALDIMINE LATENT CURING AGENT THAT HYDROLYSES ON EXPOSURE TO MOISTURE, YIELDING A REACTIVE AMINE CROSSLINKER.
MATERIAS PRIMAS Y ADITIVOS PARA PRODUCTOS INDUSTRIALES
Solutions for Paints and Inks
DEFOAMERS
REQUEST INFORMATIONANTAROL L 837
MINERAL OIL DEFOAMER RECOMMENDED FOR EMULSION POLYMERIZATION PROCESS, ELIMINATES FILM DEFECTS CAUSED BY MICRO FOAM.
DEFOAMERS
REQUEST INFORMATIONANTAROL L-855
MINERAL OIL HIGH PERFORMANCE DEFOAMER RECOMMENDED FOR EMULSION POLYMERIZATION PROCESS, ELIMINATES FILM DEFECTS CAUSED BY MICRO FOAM.
DEFOAMERS
REQUEST INFORMATIONANTAROL TS-704
MINERAL OIL DEFOAMER RECOMMENDED FOR FLAT AND SEMI - GLOSS WATERBORNE ARCHITECTURAL PAINTS.
DEFOAMERS
REQUEST INFORMATIONANTAROL TS-709
MINERAL OIL GENERAL PURPOSE DEFOAMER FOR ALL TYPES OF ARCHITECTURAL COATINGS, GOOD COMPATIBILITY DO NOT AFFECT THE APPEARANCE OF THE COATING.
DEFOAMERS
REQUEST INFORMATIONANTAROL TS-760
MINERAL OIL DEFOAMER RECOMMENDED FOR HIGH GLOSS AND SEMI-GLOSS ARCHITECTURAL WATER BORNE COATINGS AND EMULSION POLYMERIZATION PROCESS.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONANTIGEL
VISCOSITY STABILIZER WITH WET AND DISPERSION PROPERTIES IN SOLVENT SYSTEMS.
DEGASSING AGENTS
REQUEST INFORMATIONBENZOINA (BENZOIN)
LOW COST DEGASSING AGENT, YELLOWS.
IRON OXIDE PIGMENTS
REQUEST INFORMATIONBLACK IRON OXIDE PIGMENT
BLACK IRON OXIDE PIGMENT FOR COATINGS
HOLLOW MICROSPHERES
REQUEST INFORMATIONCENOSPHERE LOW DENSITY 30 MESH
HOLLOW CERAMIC MICROSPHERES, THERMAL AND ACOUSTIC INSULATION IN ROOF COATINGS AND STUCCOS.
REINFORCING AGENTS
REQUEST INFORMATIONCREAMIX TC 1004/5
GREY CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 250 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREAMIX TC 2004
GREY CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 1000 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREATECH TC 40
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 40 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREATECH TC 90
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 90 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREATECH TC 200
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 200 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREATECH TC 750
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 800 MICRONS.
REINFORCING AGENTS
REQUEST INFORMATIONCREATECH TC 2500
WHITE CELLULOSE FIBER. REINFORCING AGENT FOR ROOF COATINGS AND STUCCOS, MEDIAN PARTICLE SIZE 2500 MICRONS.
DECORATIVE CHARGES
REQUEST INFORMATIONDECORFLAKE
NATURAL DECORATIVE MICA IN DIFFERENT COLORS AND PARTICLE SIZES
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 501
PHTHALO BLUE PIGMENT 15:0 FOR WATER BASE INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 801
PHTHALO BLUE PIGMENT 15:1 FOR WATER-BASED PAINTS AND INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1001
PHTHALO BLUE PIGMENT 15:3 FOR OFFSET INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1002
PHTHALO BLUE PIGMENT 15:3 FOR SOLVENT BASE PAINTS AND INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1003
PHTHALO BLUE PIGMENT 15:3 FOR WATER BASE PAINTS AND INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1100 AMBTKN
PHTHALO BLUE PIGMENT 15:4 FOR NITROCELLULOSE AND POLYAMIDE SOLVENT BASE INKS, FLEXO AND GRAVURE.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1100 HRGTN
PHTHALO BLUE PIGMENT 15:4 FOR SOLVENT BASE NITROCELLULOSE FLEXO INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA BLUE 1100 PNPS
PHTHALO BLUE PIGMENT 15:4 FOR ALL KIND OF SOLVENT BASE PAINTS AND INKS.
PHTHALO PIGMENTS
REQUEST INFORMATIONDEEPRA GREEN 2000
PHTHALO GREEN PIGMENT 7 FOR ALL KIND OF PAINTS AND INKS.
ACRYLIC RESINS
REQUEST INFORMATIONESCAT 22
CO-REACTANT FOR POLYESTER-ACRYLIC POWDER COATINGS, IMPROVES SMOTHNESS AND CHEMICAL PROPERTIES.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT 50
50% ACTIVE 2 - ISOPROPYL - IMIDAZOLE TO ACCELERATE THE CURE OF POWDER COATINGS, TYPICAL SYSTEMS SUCH POLYESTER - EPOXY, ACRYLIC - EPOXY AND POLYESTER - TGIC.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT 60
IS A PURIFIED IMIDAZOLE CATALYST ABSORBED ONTO A SILICA CARRIER. THE PRODUCT IS USED TO ACCELERATE THE CURE OF POWDER COATINGS THAT ARE RESPONSIVE TO IMIDAZOLE CATALYSIS.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT 124
IS TETRABUTYL AMMONIUM BROMIDE ABSORBED ONTO A POROUS CARRIER, RESULTING IN A HIGHLY REACTIVE CATALYST. POWDER COATINGS THAT CAN BE CATALYZED WITH ESCAT 124 INCLUDE POLYESTER-EPOXY, CARBOXYL ACRYLIC-EPOXY, POLYESTERS CURED BY GMA-FUNCTIONAL ACRYLICS AND POLYESTER-TGIC SYSTEMS. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT A-130
IS A LIQUID CATALYST CONSISTING OF DIMETHYL AMINO METHYL PHENOL (DMP-30; 2,4,6-TRIS (DIMETHYLAMINOMETHYL) PHENOL; CAS# 90-72-2) ABSORBED ONTO A SILICA CARRIER. IT IS DESIGNED TO AID DISPERSION INTO EPOXY COATINGS AND IS AN EFFECTIVE CURING ACCELERATOR FOR EPOXY OR HYBRID SYSTEMS UTILIZING A POLYAMIDE OR ANHYDRIDE HARDENER. ESCAT A-130 IS COMPLIANT WITH FDA 175.300. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT A-140
IS A LIQUID CATALYST CONSISTING OF DIMETHYL STEARYL AMINE (DMSA; N,N-DIMETHYL-1-OCTADECYLAMINE; CAS#124-28-7) ABSORBED ONTO A SILICA CARRIER. IT LOWERS THE CURE TEMPERATURE OF POLYESTER EPOXY HYBRID FORMULATIONS WHILE MAINTAINING HIGH FLOW AND GEL TIMES. IT CAN ALSO SERVE AS A DE-BLOCKING ACCELERATOR IN URETHANE DURABLE COATING SYSTEMS. THE RECOMMENDED USAGE LEVEL IS FROM 0.1 TO 0.5% OF THE TOTAL FORMULATION. EACH APPLICATION SHOULD BE TESTED TO DETERMINE THE OPTIMUM CATALYST LEVEL TO ACHIEVE THE DESIRED CURE TIME AND COATING PROPERTIES.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONESCAT BT-71
TIN-BASED CATALYST COMPRISED OF DIBUTYLTIN DILAURATE ADSORBED ONTO A SILICA CARRIER FOR POLYURETHANE POWDER COATINGS.
INTUMESCENT FILLERS
REQUEST INFORMATIONFIRE CARB TEG 160
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANSION 85 ML/g AT 1000º C.
INTUMESCENT FILLERS
REQUEST INFORMATIONFIRE CARB TEG 345
EXPANDABLE GRAPHITE. INTUMESCENT AGENT, EXPANSION 250 ML/g AT 1000º C.
DEFOAMERS
REQUEST INFORMATIONFOAM BLAST 20F
WAS DEVELOPED TO PROVIDE MAXIMUM FOAM CONTROL AQUEOUS, SOLVENT, AND UV AND EB-CURED INKS AND COATING SYSTEMS, ALLOWING THE INK AND COATING INDUSTRIES
DEFOAMERS
REQUEST INFORMATIONFOAM BLAST 269
IS A CONCENTRATED SILICONE EMULSION ANTIFOAM/DEFOAMER FOR USE IN HOT AND COLD AQUEOUS SYSTEMS. OVER A WIDE PH RANGE.
DEFOAMERS
REQUEST INFORMATIONFOAM BLAST 295
IS AN ORGANIC-SILICONE DEFOAMER DEVELOPED FOR USE AS A FOAM CONTROL AGENT FOR AQUEOUS SYSTEMS SUCH AS PRINTING FOUNTAIN SOLUTIONS, AQUEOUS RESINS, AND SURFACTANT SYSTEMS. IT DOES NOT CREATE HAZE, NOR DOES IT SEPARATE AND FORM A RING OR SURFACE LAYER.
DEFOAMERS
REQUEST INFORMATIONFOAM BLAST 331
HIGH PERFORMANCE MINERAL OIL DEFOAMER FOR COATINGS, INKS AND ADHESIVE SYSTEMS.
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONFUMED ALUMONIUM OXIDE
FLOW AGENT AND ELECTROSTATIC CHARGE IMPROVER FOR POWDER COATINGS
DECORATIVE CHARGES
REQUEST INFORMATIONGLITTERS
DECORATIVE PLASTIC FILLERS OF DIFFERENT COLORS AND BROAD PARTICLE SIZE. FOR INK AND COATINGS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
REQUEST INFORMATIONHYDRAL 710
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
REQUEST INFORMATIONHYDRAL COAT 2
ULTRA FINE ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS.
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONHYDROPHILIC FUMED SILICA
THICKENER, THIXOTROPIC AND ANTI-SETTLING AGENT FOR PAINTS, INKS, ADHESIVES AND SEALANTS
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONHYDROPHOBIC FUMED SILICA
THICKENER, THIXOTROPIC , ANTI SETTLING AND SAG RESISTANCE AGENT FOR COATINGS, SEALANTS AND ADHESIVES
OXAZOLIDINES
REQUEST INFORMATIONINCOZOL 2
MOISTURE SCAVENGER FOR POLYURETHANE COATINGS. OXAZOLIDINE BASE.
OXAZOLIDINES
REQUEST INFORMATIONINCOZOL 4
BIS-OXAZOLIDINE CURING AGENT FOR POLYURETHANES SEALANTS AND ELASTOMERS.
OXAZOLIDINES
REQUEST INFORMATIONINCOZOL EH
HIGH PURITY CURING AGENT FOR POLYURETHANES.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL C-78
SOLID ACRYLIC RESIN WITH TG = 67-75°C SUITABLE FOR USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS, INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL C-80
OLID ACRYLIC RESIN USE AS A CURATIVE RESIN IN HYBRID POWDER COATINGS WITH ENHANCED WEATHERABILITY PERFORMANCE. TG = 75 - 85°C, ALSO RECOMMENDED FOR INDUSTRIAL SOLVENT BASED COATINGS AND ADHESIVES.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL EP-450
SOLID ACRYLIC RESIN DESIGNED FOR CLEAR POWDER COATINGS APPLICATIONS, COMPATIBLE WITH OTHER POWDER COATINGS BINDER SYSTEMS TG = 68°C.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL EP-460
SOLID ACRYLIC RESIN FOR CLEAR POWDER COATINGS, CAN BE CURED WITH CARBOXYL OR AMINE FUNCTIONAL CURATIVES. TG = 44 - 55°C.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL EP-570G
ACRYLIC MATTING RESIN FOR POLYESTER POWDER COATINGS, STANDARD AND SUPERDURABLE. GIVES THE BEST APPEARANCE.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL EP-575G
ACRYLIC MATTING RESIN FOR STANDARD AND SUPERDURABLE POLYESTER POWDER COATINGS, EXCELLENT IMPACT AND CHEMICAL RESISTANCE PROPERTIES.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL EP-578G
IS A GLYCIDYL-FUNCTIONAL, ACRYLIC COPOLYMER DESIGNED FOR USE AS A HARDENER CAPABLE OF PRODUCING MATTE EXTERIOR-DURABLE POLYESTER POWDER COATINGS. FORMULATED PROPERLY, IT WILL ACHIEVE <10 GLOSS (600) IN PIGMENTED COATINGS WITH A VARIETY OF STANDARD AND SUPER-DURABLE RESINS IN A SINGLE EXTRUSION SYSTEM WHILE ALSO EXHIBITING EXCELLENT BURNISH RESISTANCE, CHEMICAL RESISTANCE, AND MECHANICAL PROPERTIES. ADDITIONAL BENEFITS INCLUDE SMOOTH APPEARANCE OF THE CURED FILM AND LOW CONTAMINATION CHARACTERISTICS.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL EP-581LT
ACRYLIC MATTING RESIN FOR LOW TEMPERATURE CURED POLYESTER POWDER COATINGS. ABLE TO ACHIEVE 60° GLOSS < 10 IN PIGMENTED SYSTEMS.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).\N\N
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL G-152
GLOSS MODIFIER RESIN FOR EPOXY LOW BAKE POWDER COATINGS (125°C).
MATTING AGENTS
REQUEST INFORMATIONISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL G-154
GLOSS MODIFIER FOR LOW BAKE HYBRID POWDER COATINGS, 60° GLOSS RANGE 2-45.
ACRYLIC RESINS
REQUEST INFORMATIONISOCRYL GMA-300G
GLYCIDYL - FUNCTIONAL ACRYLIC POLYMER FOR POLYESTER - ACRILIC HYBRID POWDER COATINGS.
MATTING AGENTS
REQUEST INFORMATIONISOCRYL H-1871
ACRYLIC MATTING RESIN FOR POLYESTER - PU POWDER COATINGS. EXCELLENT BURNISH RESISTANCE IN DARK COLORS.
CLAYS
REQUEST INFORMATIONKAMIN 70C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL AND TRAFFIC PAINTS.
TITANIUM DIOXIDE EXTENDERS
REQUEST INFORMATIONKAMIN 70C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL AND TRAFFIC PAINTS.
CLAYS
REQUEST INFORMATIONKAMIN 90
DELAMINATED CLAY, ALUMINUM SILICATE. TITANIUM BIOXIDE EXTENDER FOR HIGH GLOSS ARCHITECTURAL PAINTS.
TITANIUM DIOXIDE EXTENDERS
REQUEST INFORMATIONKAMIN 90
DELAMINATED CLAY, ALUMINUM SILICATE. TITANIUM BIOXIDE EXTENDER FOR HIGH GLOSS ARCHITECTURAL PAINTS.
CLAYS
REQUEST INFORMATIONKAMIN 2000C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL PAINTS.
TITANIUM DIOXIDE EXTENDERS
REQUEST INFORMATIONKAMIN 2000C
CALCINED CLAY, ALUMINUM SILICAT TITANIUM BIOXIDE EXTERDER FOR FLAT ARCHITECTURAL PAINTS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
REQUEST INFORMATIONKEMGARD 981
BASIC COMPLEX ZINC PHOSPHATE, USED AS FLAME RETARDANTS AND SMOKE SUPPRESSANTS IN COATINGS.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONKORRODUR
ANTICORROSIVE AGENT FOR SOLVENT BASED COATINGS.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONLA THIX FB
LIQUID RHEOLOGICAL MODIFIER. FOR SOLVENT BASED COATINGS.
CLAYS
REQUEST INFORMATIONLITHOSPERSE 7005 CS
HIGH PERFORMANCE TREATED CLAY, EXCELLENT CHOICE FOR COLD SET LITHOGRAPHIC INKS, REDUCES MIST IN HIGH SPEED SYSTEMS.
UV CURING RESINS
REQUEST INFORMATIONLUMICRYL 102
UV / EB CURABLE ACRYLIC MONOMER SUITABLE FOR FORMULATING COATINGS AND INKS WITH EXCELLENT ABRASION AND CHEMICAL RESISTANCE.
UV CURING RESINS
REQUEST INFORMATIONLUMICRYL 2382
SOLVENT - BORNE ACRYLATED ACRYLIC MACROMER SUITABLE FOR FORMULATING UV CURABLE COATINGS AND INKS, WILL DRY TO A TACK - FREE AND NON - BLOCKING FILM AFTER THE SOLVENT IS REMOVED.
UV CURING RESINS
REQUEST INFORMATIONLUMICRYL U-721S
UV / EB CURABLE ACRYLIC MACROMER SUITABLE FOR FORMULATING COATINGS AND INKS WITH EXCELLENT ABRASION AND CHEMICAL RESISTANCE, AND OUTSTANDING MECHANICAL PROPERTIES.
DECORATIVE CHARGES
REQUEST INFORMATIONMICACLAD
NATURAL DECORATIVE MICA IN DIFFERENT COLORS AND PARTICLE SIZES.
BARRIER PIGMENTS
REQUEST INFORMATIONMICAFORT SX 300
MUSCOVITE MICA, POTASSIUM ALUMINUM SILICATE FOR INDUSTRIAL COATINGS WITH HIGH ASPECT RATIO AND HIGH BRIGHTNESS.
BARRIER PIGMENTS
REQUEST INFORMATIONMICA MT 200
MUSCOVITE MICA, POTASSIUM ALUMINUM SILICATE FOR INDUSTRIAL COATINGS, 200 MESH FOR INDUSTRIAL COATINGS AND JOINT COMPOUNDS.
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
REQUEST INFORMATIONMICRAL 632
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS, MEDIAN PARTICLE DIAMETER MICRONS 3.5
FLAME RETARDANT AGENTS AND SMOKE SUPPRESSANTS
REQUEST INFORMATIONMICRAL 1500
ALUMINUM TRIHYDRATE. FLAME RETARDANT AGENT AND SMOKE SUPPRESSANT IN PAINTS AND COATINGS, MEDIAN PARTICLE DIAMETER MICRONS 1.5
TALCS
REQUEST INFORMATIONMICRON TALC 2050 SSW
HYDRATED MAGNESIUM SILICATE, HIGH PURITY TALC, FREE FROM CRYSTALLINE SILICA AND FREE OF ASBESTOS. FOR PAINTS AND COATINGS, 4-5 HEGMAN.
TALCS
REQUEST INFORMATIONMICRON TALC 5030 SSW
MAGNESIUM SILICATE, HIGH PURITY TALC, FREE FROM CRYSTALLINE SILICA AND FREE OF ASBESTOS. FOR PAINTS AND COATINGS, 4-5 HEGMAN.
BARRIER PIGMENTS
REQUEST INFORMATIONMIOX MICRO 40
MICACEOUS IRON OXIDE FOR INDUSTRIAL COATINGS, MEDIAN PARTICLE SIZE 40 MICRONS.
BARRIER PIGMENTS
REQUEST INFORMATIONMIOX SG
MICACEOUS IRON OXIDE FOR HIGH PERFORMANCE ANTICORROSIVE INDUSTRIAL COATINGS.
HYDROCARBON RESINS
REQUEST INFORMATIONNOVARES TD 100
HYDROCARBON RESIN. PROMOTES THE LEAFING EFFECT IN ALUMINUM PAINTS. IMPROVES MOISTURE RESISTANCE, REDUCES DRYING TIME.
HYDROCARBON RESINS
REQUEST INFORMATIONNOVARES TK 100
HYDROCARBON RESIN. PROMOTES THE LEAFING EFFECT IN ALUMINUM PAINTS. IMPROVES MOISTURE RESISTANCE AND GLOSS. REDUCES DRYING TIME. EXCELLENT CHOICE FOR WOOD VARNISHES.
NATURAL RED IRON OXIDE
REQUEST INFORMATIONOXIRED MR 11
NATURAL RED IRON OXIDE WITH HIGH OPACITY.
DEGASSING AGENTS
REQUEST INFORMATIONOXYMELT A-2
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE FOR USE IN SYSTEMS CURED BY GAS OVENS.
DEGASSING AGENTS
REQUEST INFORMATIONOXYMELT A-4
DEGASSING AGENT FOR POWDER COATINGS WITH SUPERIOR YELLOWING RESISTANCE, COMPLIES WITH FDA 175.300
THIXOTROPIC AGENT
REQUEST INFORMATIONPALYGEL 325NA
ATAPULGITE, ALUMINUM MAGNESIUM SILICATE, THIXOTROPIC AND ANTI-SETTING AGENT FOR INDUSTRIAL COATINGS.
DECORATIVE CHARGES
REQUEST INFORMATIONPEARLESCENT PIGMENTS
COLORED MICAS OF DIFFERENT PARTICLE SIZE AND COLORS.
MATTING AGENTS
REQUEST INFORMATIONPERGOPAK
ORGANIC MATTING AGENT THAT ALSO PROVIDES \"SOFT FEEL\" FINISHES TO PAINTS AND VARNISHES.
CLAYS
REQUEST INFORMATIONPOLYGLOSS 90
ULTRA FINE DELAMINATED CLAY, ALUMINUM SILICATE FOR HIGH GLOSS WATER AND SOLVENT BASE PAINTS.
TITANIUM DIOXIDE EXTENDERS
REQUEST INFORMATIONPOLYGLOSS 90
ULTRA FINE DELAMINATED CLAY, ALUMINUM SILICATE FOR HIGH GLOSS WATER AND SOLVENT BASE PAINTS.
CLAYS
REQUEST INFORMATIONPOLYPLATE P 01
ALUMINUM SILICATE DELAMINATED AND WASHED CLAY FOR SOLVENT AND WATER BASE INDUSTRIAL COATINGS.
ADHESION PROMOTERS
REQUEST INFORMATIONPOLYTEX E 75
SULFONAMIDE EPOXY RESIN DILUTED IN BUTYL ACETATE, FORMALDEHYDE FREE, GLOSS AND ADHESION PROMOTER FOR NAIL ENAMELS AND PRINTING INKS.
ADHESION PROMOTERS
REQUEST INFORMATIONPOLYTEX E 100
SULFONAMIDE EPOXY RESIN 100% SOLIDS, FREE OF FORMALDEHYDE. ADHESION AND GLOSS PROMOTER IN NAIL ENAMELS.
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONPRECIPITATED SILICON DIOXIDE
REINFORCING AND THIXOTROPIC AGENT FOR ADHESIVES AND SEALANTS
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONPRECIPITATED SILICON DIOXIDE
MATTING AGENT FOR INKS AND COATINGS
IRON OXIDE PIGMENTS
REQUEST INFORMATIONRED IRON OXIDE PIGMENT
RED IRON OXIDE PIGMENT FOR PAINTS AND ROOF COATINGS
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW 3N
LEVELING AND FLOW CONTROL AGENT FOR USE IN WATERBASED COATINGS. ACRYLIC POLYMER BASE, CAN ALSO BE INCORPORATED INTO HIGH SOLIDS AND SOLVENT BASED COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW L65F
ACRYLIC FLOW CONTROL AGENT IS USED MAINLY IN SOLVENT BORNE AUTOMOTIVE CLEARCOATS AND INDUSTRIAL COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW LF
ACRYLIC LEVELING AGENT USED IN HIGH SOLIDS, UV CURING, COIL, AND OTHER COATING SYSTEMS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW LG 99
NON-SILICONE FLOW, LEVELING AND WETTING ADDITIVE FOR UV AND SOLVENT-BASED INKS AND COATINGS. CAN ALSO BE USED IN UV FREE RADICAL, CATIONIC CURE SYSTEMS AND SOLVENT-BASED COATINGS.
UV CURING RESINS
REQUEST INFORMATIONRESIFLOW LG 99
IS A NON-SILICONE, FLOW, LEVELING AND WETTING ADDITIVE FOR UV AND SOLVENT-BASED INKS AND COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW LV 67
ACRYLIC FLOW AND LEVELING ADDITIVE USED IN GENERAL INDUSTRIAL AND COIL COATING SYSTEMS TO IMPROVE AIR RELEASE AND REDUCE SOLVENT POPPING.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW P-37
CRATER REPAIR FLOW CONTROL AGENT FOR POWDER COATINGS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW P-64F
FLOW CONTROL AGENT FOR CLEAR POWDER COATINGS, GIVES THE BEST CLARITY.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW P-67
FLOW CONTROL AGENT FOR POWDER COATINGS, WIDE END USES, INDUSTRY STANDARS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW P-71
IS BASED ON A LOW VISCOSITY, LIQUID ACRYLIC POLYMER THAT HAS BEEN CONVERTED INTO A FREE-FLOWING POWDER BY ADSORPTION ONTO SILICA-TYPE FILLER. THE PRODUCT HAS SUPERIOR FLOW AND LEVELING CHARACTERISTICS WITH EXCELLENT CLARITY ESSENTIAL FOR CLEAR POWDER COATINGS. SURFACE DEFECTS SUCH AS ORANGE PEEL, CRATERS, PINHOLES, AND OTHER IMPERFECTIONS CAN BE REDUCED OR ELIMINATED BY INCORPORATING 0.7-1.5% OF RESIFLOW P-71 INTO POWDER COATING FORMULATIONS. IT IS ESPECIALLY RECOMMENDED FOR USE IN GMA AND TGIC CLEARS.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW PL-200
FLOW CONTROL AND LEVELLING AGENT WITH EXCELENT RECOATABILITY PROPERTIES.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW PL-330
NEXT GENERATION FLOW CONTROL AGENT WITH THE BEST RESISTANCE TO CONTAMINATION.
LEVELLING AGENTS AND FLOW PROMOTERS
REQUEST INFORMATIONRESIFLOW PL-440
IS A HIGH-PERFORMANCE FLOW CONTROL AGENT DESIGNED TO HIDE THE EFFECTS OF CROSS-CONTAMINATION WHILE PROVIDING SUPERIOR FLOW AND LEVELING CHARACTERISTICS. IMPROVED COMPATIBILITY CAN LOWER MANUFACTURING COSTS BY REDUCING BOTH REWORK AND CLEAN-UP DURING PRODUCT CHANGEOVERS. RESIFLOW PL-440 ALSO DEMONSTRATES EXCELLENT RECOAT AND ADHESION PROPERTIES. THIS PRODUCT IS SUITABLE ACROSS A WIDE SPECTRUM OF BINDER CHEMISTRIES INCLUDING POLYESTERS, POLYURETHANES, HYBRIDS, EPOXIES, AND ACRYLICS.
THIXOTROPIC AGENT
REQUEST INFORMATIONRIOBENT
BENTONITE, THIXOTROPIC AND ANTI-SETTING AGENT FOR INDUSTRIAL COATINGS SOLVENT BASE
WAXES
REQUEST INFORMATIONSBS 1200
SYNTHETIC WAX USED IN POWDER COATINGS TO IMPART SLIP, IMPROVE MAR RESISTANCE AND LOWER GLOSS.
WAXES
REQUEST INFORMATIONSBS 1215
SPECIAL POLYOLEFIN PTFE WAX USED IN POWDER COATINGS TO PROVIDE EXCEPTIONAL SCRATCH, ABRASION, MAR AND WATER RESISTANCE.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONSCHWEGO FLUOR
SUBSTRATE WETTING AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
ADDITIVES / CATALYSTS
REQUEST INFORMATIONSCHWEGO WETT
WETTING AND DISPERSANT AGENT. FOR COATINGS, VARNISHES AND PRINTING INKS.
TITANIUM DIOXIDE EXTENDERS
REQUEST INFORMATIONSPACE RITE S3
ALUMINUM TRIHYDRATE, FLAME RETARDANT, SMOKE SUPPRESSANT AND TITANIUM DIOXIDE EXTENDER FOR PAINT AND COATINGS.
ADHESION PROMOTERS
REQUEST INFORMATIONSULFONEX M 80
TOSYLAMIDE/FORMALDEHYDE RESIN USED AS A MODIFIER IN LACQUERS, INKS AND ADHESIVES. PROMOTE GLOSS, ADHESION AND OVERALL DURABILITY.
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONSURFACE TREATED FUMED SILICA
HIGH PERFORMANCE MATTING AGENT FOR INKS AND COATINGS
FUMED AND PRECIPITATED SILICA
REQUEST INFORMATIONSURFACE TREATED SILICON DIOXIDE
HIGH EFFICIENCY MATTING AGENT FOR COATINGS AND INKS
ADDITIVES / CATALYSTS
REQUEST INFORMATIONWORLÉE ADD 315
SILICON BASED ADDITIVE, FOR WATER AND SOLVENT BASED PAINTS, IMPROVING MAR RESISTANCE AND SLIP, FLOW AND GLOSS.
ALKYD EMULSIONS FOR WATERBORNE PAINTS AND VARNISHES
REQUEST INFORMATIONWORLÉESOL E 150W
ALKYD EMULSION RESIN WITH LOW POLYURETHANE MODIFICATION, WIDE RANGE OF APPLICATIONS.
ALKYD EMULSIONS FOR WATERBORNE PAINTS AND VARNISHES
REQUEST INFORMATIONWORLÉESOL E 330 W
ALKYD POLYURETHANE EMULSION. RESIN FOR ANTICORROSIVE PRIMERS AND TOP COATS.
IRON OXIDE PIGMENTS
REQUEST INFORMATIONYELLOW IRON OXIDE PIGMENT
YELLOW IRON OXIDE PIGMENT FOR COATINGS
No products found.
ISO 9001:2015 Certification
Committed to quality, continuous improvement, and excellence in our processes.
38 years of experience
A proven track record providing reliable solutions to a wide range of industrial sectors.
Nationwide coverage
Service and distribution capabilities throughout Mexico.